About5 Volt USB Charger Module For Power Bank
This is not meant for charging a battery from a USB Port from a computer. A USB Port will only source 500mA max. If you want to use this to charge from a USB port you would have to replace the resistor which is explained below. Even then, we have not done tests to know if this will make using a USB computer port an option with this board.
An ampere meter can only be connected to 5v input end of the module. When charging it is better that the charging current is 37% of the battery capacity. So if you charge to the battery of 1000mAH, current of 400 is enough. Make sure you use a proper gauge wire for the current being used. Too thin and it will burn, too thick and the circuit may not act correctly. Make sure the connection at the contract points are good. If the input voltage is too high, like 5.2v, the current will be less than 1000mA, it is a normal protection function. NO Reverse polarity, connecting the battery the wrong way will fry the chip.
The current can be altered (lowered) by changing the resistor connected to pin 2 of the IC (at the bottom middle of the board in relation to the direction of the text). In the configuration the module ships with the current is 1A. Changing out the surface mount resistor with a higher resistance will lower the current.
About5 Volt USB Charger Module For Power Bank
This is not meant for charging a battery from a USB Port from a computer. A USB Port will only source 500mA max. If you want to use this to charge from a USB port you would have to replace the resistor which is explained below. Even then, we have not done tests to know if this will make using a USB computer port an option with this board.
An ampere meter can only be connected to 5v input end of the module. When charging it is better that the charging current is 37% of the battery capacity. So if you charge to the battery of 1000mAH, current of 400 is enough. Make sure you use a proper gauge wire for the current being used. Too thin and it will burn, too thick and the circuit may not act correctly. Make sure the connection at the contract points are good. If the input voltage is too high, like 5.2v, the current will be less than 1000mA, it is a normal protection function. NO Reverse polarity, connecting the battery the wrong way will fry the chip.
The current can be altered (lowered) by changing the resistor connected to pin 2 of the IC (at the bottom middle of the board in relation to the direction of the text). In the configuration the module ships with the current is 1A. Changing out the surface mount resistor with a higher resistance will lower the current.
What is the price of "5 Volt USB Charger Module For Power Bank"?
5 Volt USB Charger Module For Power Bank price is 99 tk but after given discount product price is : 55 tk.
Where to buy "5 Volt USB Charger Module For Power Bank"?
Just click on Buy Now and give us your name + mobile number + address, we give home delivery all over Bangladesh. See our delivery area. Our delivery man will go to all this place and give your product home delivery.
ইনবক্স এ মেসেজ করার পরিবর্তে, সরাসরি আমাদের App অথবা Website এ অর্ডার করলে পণ্য পাওয়ার নিশ্চয়তা বেশি থাকে। কারন, আপনার মেসেজটি আমাদের এজেন্ট পড়ার পূর্বে অন্য ক্রেতা App অথবা Website থেকে কিনে স্টক আউট করে দিতে পারে।
অথবা অর্ডার করার জন্য আমাদেরকে হোয়াটস্যাপ করতে পারেন এই নম্বরে: 8801972277444
Add a review
Your email address will not be published. Required fields are marked
বাংলা
